1. Step 1: Shut Off the Power to the Circuit.
  2. Step 2: Install a Double Switch Wall Box and Run the Feed Cable.
  3. Step 3: Run Cables from Wall Box to Light Fixture Locations.
  4. Step 4: Attach Pigtails to the Switches.
  5. Step 5: Join the Ground Wires.
  6. Step 6: Connect the Hot Feed Wires.

.

Moreover, how do you wire two switches to the same circuit?

If you've mounted two switches in the same electrical box, prepare two black wires. Connect one end of the 6-inch wire to the top terminal of the first switch. Twist the other end together with the black wire from the incoming circuit cable and the black wire from the cable going to the second switch to form a pigtail.

Also, can two separate circuits be in the same junction box? 2 Answers. The answer is yes you can have 2 separate circuits in the same box (they can have a splice also but not needed in your case). The only concern would be the total box fill.

Also to know is, how do you wire multiple lights to one switch?

You run another 12/2 or 14/2 cable from the top of the switch box to the first light. You connect the black wire to the switch. You connect the 2 white wires together, and then connect the other terminal on the switch to the black wire of the cable leaving this junction box towards the first light.

Can I wire lights and outlets on the same circuit?

An option for you if you don't want two switches is just to use a blank face plate (check this question). Basic answer to your question of can a mixture of lights and receptacles be installed on a single circuit is yes. The neutral will be white but some switches are wired up with a white wire that is not a neutral.

Related Question Answers

Does it matter which wire goes where on a light switch?

If your switch has a “LINE” marking, the always hot wire goes to this. The other connection will be “LOAD” where the load (ie light fixture) is wired. The load wire may have red electrical tape on it to differentiate.

How many lights can I put on one switch?

A maximum of 96 lights you can connect in parallel but to prevent the risk of unnecessary sparks and arc when operating the switch with having moisture on the switch or you hand, you can connect less than the maximum or you can use several switches instead.

What is a 2 way light switch?

2 way switching means having two or more switches in different locations to control one lamp. They are wired so that operation of either switch will control the light. This arrangement is often found in stairways, with one switch upstairs and one switch downstairs or in long hallways with a switch at either end.

How do I add a second light switch without wiring?

How to Add a Second Light Switch Without Wiring
  1. Unscrew the wall plate.
  2. Unscrew the existing switch.
  3. Mark the wires before you remove them.
  4. Disconnect the wires from the current switch.
  5. Connect wires to the corresponding parts of the Lutron switch.