Hold one of the mounting brackets against the wall on the first mark and mark the positions of the screw holes. Remove the bracket and drill a 1/4-inch hole on each mark. Insert a No. 8 plastic screw anchor into each hole.
.
Also, how do you hang a curtain rod without studs?
If there IS NOT a stud, you will use a drywall anchor and a screw. The anchors are the white pieces in the below photo: Knowing which to use is very important — without a drywall anchor, a screw alone will not hold the weight of the curtain and rod.
Likewise, how much weight can a drywall anchor hold? Toggles, anchors or molly bolts are surprisingly strong. A 1/8 toggle can hold 30 pounds on 1/2-inch drywall and a 3/8-inch toggle can handle a hefty 50 pounds or more safely. When applying any kind of drywall anchor, you should understand how they work and which screw anchor may work best to put into a hollow wall.
People also ask, do curtain rods need to be hang on studs?
Wall studs are usually placed at 16 or 24 inches on-center. If no wall studs are available, install wall anchors in the drywall. Screw the curtain rod brackets into the wall anchors.
How can I hang curtains without putting holes in the wall?
Take one of your 3M Command hooks, take off the paper backing on the adhesive strips, and line the hook up on the wall using the pencil mark for guidance. Press it on the surface well, holding for at least 30 seconds, then let it be for at least a half hour.
Related Question AnswersWhat is the proper placement of curtain rods?
The ideal position for the curtain rod is 6 inches to the left/right of the window trim. You may need to make adjustments based on how much linear space is needed for the curtain fabric to hang easily and look “full”. The finials, or decorative ends of poles may extend past the 6 inches.Do curtains need to touch the floor?
As a general decorating rule, drapes should be long enough to touch the floor. The amount of drapery material reaching the floor depends on the desired look of the curtains once they are hanging around the windows.Where should a curtain rod be placed?
Rule 1: Hang Curtains Above the Frame To create the illusion of a taller window, mount the rod four to six inches above the window frame—or halfway between the frame and the ceiling molding. (But within reason—don't go more than eight inches above the frame or it might look awkward.)How do you fix a curtain rod that's on the wall?
- Remove the curtain rod from the rod mounts.
- Locate the damaged drywall where the curtain rods were mounted.
- Tap a small plastic anchor into each hole in the drywall with a hammer.
- Position the curtain mount over the two anchors and insert a matching screw through the top and bottom holes of the mount into the anchors.
How many curtain rod brackets do I need?
Count how many brackets are included with the curtain rod. As a general rule, there should be at least one bracket for each outside corner of the window, and one bracket in the center. Add more brackets if the expanse between the middle and outer brackets is more than three feet.What type of curtain rod do I need?
Selecting the Right Size. Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.How do you hang a curtain rod from the ceiling?
How to Hang a Curtain Rod from the Ceiling- Measure and Mark. Use a pencil to mark where each ceiling-mount curtain rod bracket will go.
- Install Anchors. Use the power drill to install drywall anchors.
- Hang Curtains. Slide your curtains onto the curtain rod and insert the rod into the mounting brackets.
What are standard curtain sizes?
When measuring for curtains, keep in mind that curtains usually come in only a few different lengths: 63 inches, 84 inches, 95 inches, 108 inches, and 120 inches. Tier curtains, which are shorter and generally don't cover an entire window, are usually either 24 inches or 36 inches long.How do you hang curtain rods over blinds?
How to Install Curtain Rods Over Blinds- Purchase the right curtain hardware.
- Use a light pencil mark to indicate where the screws for the hardware will go into the wall.
- Attach the telescoping hardware or the elongated rod hardware to the wall using the screws provided.
- Gently adjust the rods and hardware to the proper lengths.
Can Command hooks hold a curtain rod?
They can be merely decorative, or they can serve to block out the light. Many landlords don't allow renters to drill holes into walls, which is necessary for installing curtain rod hooks. Fortunately, it is still possible to install curtain rods with Command hooks.How do you reinforce a curtain rod bracket?
Simply place the Kwik-Hang brackets on the top of your window trim, tap them in, hang your curtains and move on to your next task. No screws, drills, holes or damage. Kwik-Hang brackets hold up to 20 pounds, and you can reinforce your curtain rod with a Kwik-Hang center bracket for added support.How far should curtains be off the floor?
The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.Do you need a drill to put up a curtain pole?
To fit your pole or track you will need to drill into a wall, so it's best to check before you start that there are no pipes or cables nearby. If you're not sure where the pipes or cables lie, use a cable detector to check the area first.Do I need a drill to hang a curtain rod?
Either way you will need to buy a drill bit, (or a set). Rather than use a drill, you could get a large nail and hammer it in part way to make the screw holes you need. After pulling the nail back out, then you will just need to use a screw driver to mount the curtain rod brackets.Is there a stud next to a window?
Find Wall Studs Above and Below Doors and Windows But there are also horizontal framing members located above and below door and window openings. Above windows and doors are doubled-up studs called headers. Sometimes, these are two-by-six studs turned on edge.How do I find a stud in my wall with a flashlight?
- Shine a flashlight at a steep angle against the wall. Look for a column of bumps or dimples in the surface.
- Examine the baseboard for nails or outlets.
- Measure 16 inches from the first stud you find to approximate the location of the next one.
- Drive a small nail into the wall where you believe you have found a stud.
