Blue Stripe Poly Pipe Blue Stripe Poly Pipes are fundamentally the same as black poly pipes, however it is externally blue striped to code what type of medium (mains water) it contains, (also known as potable water mains). Blue Striped poly pipe is also known as Blue Line HDPE Pipe.

.

Similarly, you may ask, what do the stripes on poly pipe mean?

Polyethylene Pipe. Pipe-with-the-Stripe® (PWS) polyethylene pipe features a coloured stripe extruded into the pipe wall as a permanent reminder of the grade and pressure rating. PWS pipe is ID-controlled and is typically connected using insert fittings and gear clamps.

Beside above, is Blue Line Poly UV rated? Please see the freight section for freight details. Our metric poly pipe is manufactured to Australian Standard 4130, is completely UV stable, suitable for use with potable drinking water, sea water and compatible with many chemicals. Metric blue-stripe poly pipe is measured on the outside diameter.

Similarly, you may ask, what is the difference between Blue Line and Green Line Poly?

32mm PN12. 5 Blue Stripe poly has an internal diameter (ID) of about 27mm whereas 32mm Green Stripe has an ID of 31.5mm. This gives the 32mm Green Stripe about 73% more volume and a flow rate that is slightly more than double with the same head than with 32mm Blue Stripe.

What does HDPE pipe look like?

HDPE pipe is a type of flexible plastic pipe used for fluid and gas transfer and is often used to replace ageing concrete or steel mains pipelines. Made from the thermoplastic HDPE (high-density polyethylene), its high level of impermeability and strong molecular bond make it suitable for high pressure pipelines.

Related Question Answers

What color is HDPE pipe?

HDPE pipe black with yellow stripes or full yellow jacket – fuel gases, process gases, liquefied gases under pressure (Acu-Gas HDPE pipe).

Is poly pipe safe for drinking water?

The inner pipe for drinking water is made of a plastic called cross-linked polyethylene (PEX). There are no health risks associated with drinking water from PEX pipes. A few types of PEX-pipe may cause prolonged undesirable taste and odour if the water remains in pipes over time.

What pipes are used for drinking water?

Of these the most commonly used materials for drinking-water supply piping are galvanized steel or iron, copper, polybutylene, unplasticized polyvinylchloride (PVC), chlorinated polyvinylchloride (CPVC) and polyethylene (PE).

What is poly pipe used for?

Polypipe is a manufacturer of plastic piping systems, for use in the residential, commercial, civils and infrastructure sectors. The piping systems are used for a variety of applications including drainage, plumbing, water supply, water management, cable management, heating and ventilation.

What Colour is water pipe?

BS 1710 Basic Pipeline Identification Colours
Type Colour BS 4800 Code
Water Green 12-D-45
Steam Silver Grey 10-A-03
Oils (Mineral, Vegetable or Animal) Brown 06-C-39
Gases (In Either Gas or Liquid Phase) Yellow Ochre 08-C-35

Is black poly pipe UV resistant?

Yes, Poly Pipe is UV resistant and UV stable and will not structurally degrade from UV light.

What is HDPE plastic?

High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a thermoplastic polymer produced from the monomer ethylene. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes and plastic lumber.

What is Green Line poly pipe?

Rural Poly Pipe (Green Line) is designed for Maximum pressure of 800 kPa for rural applications. PE pipes are stabilised against ultra violet (UV) light degradation by the inclusion of carbon black in the material. PE pipes are therefore suitable for installations where the pipes are exposed to direct sunlight.

What is black irrigation pipe made of?

The two piping types most commonly used for irrigation systems are white PVC (polyvinyl chloride) and “black roll pipe ” (polyethylene).

How is poly pipe measured?

Pipe Sizes. Also, Low Density and Rural poly pipe are measured by their inside diameter, while Metric poly is measured by the outside diameter. For example, 1” Rural poly pipe has an OD of 29mm and an ID of 24mm, while 25mm PN12.

How do you soften a poly pipe?

When connecting poly pipe for irrigation projects, like installing pop-up sprinklers or water features, soak your pipe ends in hot water. This will soften them and let you mould the ends to suit the fittings that join the pipes together.

What is black poly pipe?

Black polyethylene, or PE, pipe comes in very long rolls and is used in many areas for the water main between the meter and the house and for sprinkler systems. Just like any other type of pipe, poly pipe does not last forever and can develop leaks with time and with the help of tree roots.