Cedar is a popular fascia wood and redwood is another. That's because both species resist rot and moisture very well, even when unpainted. If you prime and paint the fascia, you can also make them out of fir, spruce or pine, which are all less expensive. You construct fascia boards out of 1-inch lumber.

.

Considering this, what is the best material for fascia boards?

Wood Fascia Boards Wood is the most common material used to make fascia. Typically, wood fascia boards are made of spruce, pine or fir. However, cedar fascia boards (same wood for decks) are gaining steam.

Beside above, what timber do you use for fascia boards? The most popular wood species for fascia, soffits and barge boards are; Western red cedar, European oak, Douglas fir and Larch. Accoya fascia board is a highly recommended sustainable option that is extremely durable. Utile or Iroko fascia, barge and soffit boards are also very good options.

Accordingly, how thick should fascia boards be?

Replacement fascias do vary in thickness by manufacturer, but the rule of thumb is that to qualify structurally as a replacement board they should be somewhere between 16mm and 25mm thick - our most common range is the 18mm Replacement Fascia.

Should I use pressure treated wood for fascia?

Purchase pressure-treated lumber to replace your fascia boards as a way to extend the life of the repair. Pressure-treated lumber is designed for outside applications and resists rot, moisture and insect damage. Cut the new lumber to size and secure it to the rafter ends with galvanized finish nails.

Related Question Answers

Why do fascia boards rot?

The rotting condition of the fascia is a sign that water has compromised the structural integrity of the fascia board. There are many factors that can compromise the integrity of fascia boards, but two of the most common are improper installation of drip edge and gutters.

How much should it cost to replace fascia boards?

Typical costs for vinyl or wood fascia boards and soffits range from $6 to $10 per linear foot, and the cost to fit out a simple single-level home is anything from $600 to $2,000. The price of aluminum fascia ranges from $8 to $20 or more, and the budget for a single-story home ranges from $800 to $6,000.

Are fascia boards necessary?

Fascia is meant to protect the roof and the interior of the home from moisture by blocking it from entry. It does have an aesthetic role as well; it creates an even appearance along the roof's edge. If water gets behind the fascia board, it is vulnerable to damage.

How do I protect my fascia board?

Your fascia boards bridge the gap between your roof and your gutter.

Taking Care of Your Fascia Boards

  1. Make sure that you choose excellent products.
  2. Use galvanized nails.
  3. Don't nail them in a way that will split the board over time.
  4. Paint them when possible, or add wood hardener.

What kind of nails should I use for fascia?

Hardie Trim It calls for 2-inch, 16-gauge, corrosion-resistant finish nails only when you are attaching fascia to double sub-fascia. Nails should not be closer than 1 1/4 inches from the edges and no nearer than one inch from the ends. With pneumatic nailing, Hardie Trim recommends driving the finish nails flush.

How do you fix fascia boards?

Fascia roof repair tips
  1. Choose the best wood. Handpick each wood fascia board and make sure it's from a species of wood that's naturally decay resistant.
  2. Watch where you nail your fascia. If at all possible, never nail a fascia board near the edge of the end grain.
  3. Use the best nails.
  4. Paint the ends of your fascia boards.

Can you use Hardie board for fascia?

HardieTrim boards provide unmatched durability and allow you to create a variety of design possibilities for trim, gables, corners, fascia, windows, doors, column wraps, rakes, friezes, decorative trim and other non-structural architectural elements.

How do you attach fascia to roof trusses?

Instructions for How to Attach Fascia Board to Roof Trusses Use the carpenter's square and pencil to put a straight line at the mark. Cut the board with a miter saw. Position the board against the trusses and nail it in place. Put at least 2 nails at both ends of the fascia board into the joists.

How do I know my fascia size?

Multiply the 1-1/2 inch width of the fascia board by the slope of the roof (e.g. 4/12). 1.5” times 4 divided by 12 = 0.5 or ½ inch. For a 2×6 fascia board at a 4/12 slope, the trim size would be 1-1/2 inch x 5 inches for an overhang without a soffit.

What is the board behind the fascia called?

The fascia board is the one mounted at the point where the roof meets the outer walls of the house and is often called the ROOFLINE. However most people refer to it by the name of the main board that carries the gutter – the fascia or fascias.

How do you hang fascia?

Begin installing aluminum fascia at the center of each length by pushing it up snug to the bottom of the soffit panels. Nail it, then work your way in both directions, driving nails every 16 in., placed about 1 in. from the top and bottom. Overlap joints 1 to 2 in.

Do gutters need fascia?

If the house has exposed rafters showing on the overhang, then you don't have a fascia board on that type of house. Hope this helps out. Your design allows for wood gutters that need to dry evenly on both sides. A metal gutter doesn`t have the strength on the back to support ice or ladders ect.

How much does a 1x6 cost?

Lumber Prices: Estimating the Cost of Dimensional Lumber
Board Per ft* 6'
1x6 $0.88 $5.37
1x8 $0.75 $5.98
1x10 $0.98 $7.98
1x12 $1.75 $9.98

What should I use for fascia board?

Wood Is a Common Fascia Material Cedar is a popular fascia wood and redwood is another. That's because both species resist rot and moisture very well, even when unpainted. If you prime and paint the fascia, you can also make them out of fir, spruce or pine, which are all less expensive.